I'M LOVIN' IT VINYL STICKER

  • $4.99


Decals stick to almost all flat surfaces! just peel and stick!
Long lasting 5+ year life expectancy for outdoor & 7 + indoor durability
Decorate you're Camper Van, Truck, Motor Home, Walls, Boat, refrigerator just about any flat smooth clean surface!
These are DIE-CUT decals meaning there is no background. If there is a background color in the picture, it is used only as an example.
The background color will be the color of the surface you place the sticker on, or clear if you put it on a window.
Vinyl Decals come in 3 pieces:
1. The top layer is a transparent transfer tape.
(Holds your decal or sticker together until it is applied)
2. The middle layer is your actual decal or sticker
(It is sandwiched between the Application Tape and the Wax Backing)
3. The bottom layer is the wax backing.
(protects the adhesive until the decal is ready to be applied)
How to Apply
1. Do not apply on extreme cold or hot Surfaces. The ideal temperature must be between 60°F & 90°F.
2. Do not touch the adhesive backing, oils from your skin will prevent sticking.
3. Before applying decal make sure there is no wax or oily products on the surface
4 Clean the surface where the decal will be installed
5 Slowly remove the paper backing making sure that your decal remains stuck to the clear transfer tape. If part of your decal lifts up with the backing, press the paper backing back down against it until it stays stuck to the transfer tape.
6 Once your decal is peeled away from the backing, line up & position your decal against the surface to which it will be applied.
7 Use a credit card, squeegee, or something similar to smooth down your decal, making sure that it is completely stuck to the surface.
8 Carefully & Slowly, remove the transfer tape from your decal, making sure that your decal is stuck to the surface. If you see part of the decal does not release from the transfer tape, press it back down to the surface and repeat the process.
9. Do not wash for 24 hours.