Digital 2 in 1 Handheld Portable Oscilloscope+Multi-meter

  • $260.00
  • Save $65


This handheld oscilloscope is a portable waveform measurement tool and fulfills basic electronic engineering requirements.
It is one of best 2 in 1 test tools in outdoor testing or teaching.
The high-speed AD sampler and CPU can convert the analog signal into digital signal and show on the 128X64 LCD backlight display.
The high-speed comparator can get good edge trigger to present steadily measurements.
Its multimeter part uses a dedicated chip (6000-count), which can provide a higher precision.
The large capacity lithium battery can ensure 10 hours of working charge after fully charged.AUTO Key:
* The oscilloscope will set the parameters to an input signal in the most
suitable way.

* The multimeter measurement range will switch automatically.

  • Brand Name: all sun
  • Max Waveform Capture Rate: 30,000wfm/s
  • Display resolution: 128*64 Pixels
  • Real-Time Sampling Rate: 100MSa/s
  • Record Length: 10
  • Digital Channels: 1
  • DIY Supplies: Electrical
  • Band Width: Less than 60MHz
  • IS Battery Demountable: Yes
  • Model Number: EM125
  • Display Size: 2.9 Inches & Under
  • Bandwidth: 25MHz
  • Dimensions: 174X92X40mm
  • Weight: Approx.330g
  • Sample rate: Max. real time: 100 MSa/s
  • Measuring accuracy : 50 mV/div to 5 V/div: ±0.5%
  • DC vertical offset accuracy: +/-0.2 div, +/-2 mV +/-5%
  • Channel trigger sensitivity: DC to 25 MHz: 0.8 div
  • AC/DC Voltage: 6/60/600V
  • Resistance: 600/6k/60k/600k/6M/60M
  • Capacitance: 6n/60n/600n/6000n/60u/600u/6mF
  • 1. Scopemeter X 1 pc

 

2. 20MH ( 10:1 ) Probe X 1 pc

3. Test lead X 1 pc

4. Charger X 1 pc

5. Built-in battery (1200 mAh) X 1 pc

6. User manual X 1 pc

7. Carrying bag X 1 pc

 

 

 

Performance of multimeter                                        

Display

6000counts

Input

Max.Input Voltage:CAT II 600V

Continuity Test

In 600Ω range,beeps at<25Ω

Diode Test

If voltage drop of the diode under test is more than 2V or if input terminals are open,the display will show”OL”.If voltage drop is less than 0.25V,the built-in buzzer will sound.

Capacitence Measurement

6.000Nf-6Mf,7 ranges

Resistance Measurement

600.0Ω-60.00MΩ,6 ranges

Voltage Measurement

6V-600V,3 ranges

 

 

SPECIFICATION

 

Condition:AT 23±5 degree C,and waiting 30 mintues after power-on before proceeding

 

Specification of Oscilloscope

Vertical System:channel of scope

Bandwith(-3Db)

25MHz

Accuracy

50Mv/div: ±3% of full scale

Vertical Offset Accuracy(DC)

±0.2div±2mV±0.5% of offset

Tigger sensitivity

DC to 20MHz:0.8div

Specification of probe

 

Rise Time

X1 23.3ns

X10 17.5ns

Bandwidth

X1 DC to 15 MHz

X10 DC to 25 MHz

Input Impedance

X1 1MΩ

X10 10MΩ(without scope\'s input resistance 1 MΩ

Input Capacitance

X1 46Pf(without scope\'s input resistance 1 MΩ)

X10 about 15pF

Specification of Multimeter   Accuracy Form:±(% of reading +digits)

Function

Range

Frequency,test current,or load voltage

Condition:at calibration temperature±5degree C,for 1 year

 

DC Voltage

6.000V

 

±(0.5%+8)

60.00V

 

±(0.5%+8)

600.00V

 

±(0.5%+8)

AC Voltage

6.000V-600.0V

40Hz-400Hz

±(1.0%+10)

400Hz-2kHz

±(5.0%+10)

Resistance

600.0Ω

 

±(1.0%+5)

6.000kΩ

 

±(1.0%+5)

60.00kΩ

 

±(1.0%+5)

600.0kΩ

 

±(1.0%+5)

6.000MΩ

 

±(1.0%+5)

60.00MΩ

 

±(2.0%+5)

Capacitance

6.000nF

 

±(5.0%+8)

60.00 nF

 

±(3.0%+8)

600.0 nF

 

±(3.0%+8)

6000 nF

 

±(3.0%+8)

60.00uF

 

±(3.0%+8)

600.0uF

 

±(5.0%+8)

6.000 mF

 

±(8.0%+8)

Diode

2.000V

Test Current:2mA

Buzzer beeps if the voltage is less than 0.25V.

Buzzer beeps if the resistance is less than 25Ω.